
Infrared Moisture Detection Training
Maintenance - Infrared Training
This one-day course teaches you to use a thermal imaging camera to locate moisture in building components, and to recognize the conditions under which infrared will not give you an answer.
Built for people who inspect buildings for water intrusion, or want to start doing so: roofing and restoration contractors, home and building inspectors, facility and maintenance staff, and thermographers extending into moisture work. The day moves from heat transfer fundamentals through camera setup to hands-on detection in the field.
There are several ways to attend. Reserve a seat in the next live virtual session, or use the form below to request this training at your facility, including group rates.


At a Glance
What it is
An 8-hour class covering the science that makes moisture visible to infrared, the camera settings that produce a usable analysis, and hands-on camera operation to close the day.
Who it's for
Building professionals responsible for finding water intrusion: roofing and restoration contractors, home and building inspectors, facility and maintenance teams. Also thermographers adding moisture detection to their scope of work.
Why you need it
Moisture found late becomes saturated insulation, failed roof assemblies, and remediation. This course gives you the ability to locate it non-destructively and document it credibly. Equally important, you learn the conditions that produce no result, so you stop scanning when infrared cannot answer the question rather than reporting a finding you cannot support.
Available languages
English
Duration
8 hours
Available delivery methods

Instructor Led Virtual

Onsite At Your Location
Reviews
The information was laid out in an easy-to-understand manner. We were able to take the class over zoom which is not always offered. It really did seem like an in person experience. I would definilety recommended it the others.
Chuck Carpenter
Course Details
Qualifications / Prerequisites: None. No experience with thermography is necessary.
What You Will Learn:
-
Basic heat transfer concepts as they apply to moisture in building materials
-
The capabilities and limitations of current thermal imaging systems
-
Emissivity, reflectivity, evaporative cooling, and thermal capacitance, and how each makes moisture detectable
-
The conditions and requirements needed to locate moisture with a thermal imager
-
The conditions that will not yield results, and how to recognize them before you scan
-
Camera menu settings that produce a more thorough analysis
-
How to interpret thermal images and report the issues you find
-
Hands-on camera operation and live moisture detection
Included in the Course
-
On successful completion, the IMD Certificate or CRT recertification
-
A training manual (password protected pdf manual for virtual classes and printed manual for in-person classes)
