Healthcare & Hospital Facilities
Electrical Safety Solutions for
Hospitals & Healthcare Facilities
Ensure reliable power to protect lives. In hospitals, the stakes couldn't be higher — from operating rooms and wet procedure locations to emergency power systems. From LIM testing and ATS inspections to arc flash analysis and infrared thermography, Guidant Power keeps your electrical systems safe, compliant, and running.
The Landscape
Unique Electrical Safety Challenges in Healthcare
Healthcare facilities operate under demands that most industries never face.
Continuous, life-critical power, patients who cannot be moved, and some of the strictest compliance codes in the country.
Here's what facility teams are up against.
Critical Power Systems
Complex setups with automatic transfer switches, multiple generators, and uninterruptible power supplies must all perform flawlessly to prevent outages during patient care.
Strict Compliance Requirements
Joint Commission surveys plus NFPA® 99, 110, 70B and 70E standards govern power supply systems, generator testing, and worker safety — with little room for error.
Equipment That Can't Be De-Energized
You can't just shut down power to an ICU. Live work is often unavoidable, demanding heightened precautions, accurate arc flash data, and disciplined safety protocols.
The High Cost of Downtime
Every minute of unplanned outage disrupts procedures and risks lives. Maintenance windows are narrow, so work must be planned, precise, and right the first time.
Multi-Campus Complexity
Health systems span many buildings, ages, and configurations. Consistent, compliant safety programs across every campus require a partner who can scale nationwide.
Contracted Maintenance Teams
Reliance on third-party providers like CBRE, Sodexo, and in-house crews means safe practices and hazard awareness must reach everyone who touches your equipment.
Wet Procedure Locations & Operating Rooms
Operating rooms and other wet procedure locations carry elevated shock hazards where continuity of power is non-negotiable. NFPA 99 requires isolated power systems monitored by Line Isolation Monitors (LIM), tested annually to confirm they'll alarm on the first fault — not fail during a procedure. Guidant Power helps you verify these protective systems perform exactly when a patient's safety depends on it.
Expert-Led Services
How Guidant Power Supports Healthcare Facilities
A single, trusted partner for the full spectrum of electrical safety, compliance, and reliability — tailored to the realities of a working hospital.
Arc Flash Analysis & Labeling
An NFPA 70E requirement. We model complex power systems to identify hazards under every operating scenario.
-
Incident-energy analysis across all sources
-
Real-time compliant hazard labeling
-
Multi-campus study program
Annual LIM Testing
Line Isolation Monitor testing for isolated power in ORs and wet procedure locations, required for NFPA 99 compliance.
-
OR & wet-location system verification
-
First-fault alarm confirmation
-
Documented compliance record
Annual ATS Inspections
Automatic transfer switch inspections to confirm ATS units perform reliably during a real power outage.
-
Transfer & retransfer verification
-
Emergency power system readiness
-
NFPA 110 documentation
Infrared Electrical Inspections
Annual infrared thermography scans energized equipment to catch hot spots before they cause failures or fires. Essential for meeting NFPA® 70B standards.
-
Non-invasive, no-downtime scanning
-
Early fault & loose-connection detection
-
Prioritized corrective reporting
Electrical Safety & Skills Training
Practical, real-world hands-on training tailored for contracted and in-house maintenance teams.
-
Energized-work safe practices
-
Multi-source power awareness
-
Custom sessions for CBRE, Sodexo & in-house
Electrical Engineering Services
Licensed engineers deliver power system studies, modeling, and lifecycle support for aging and expanding facilities.
-
Power system modeling & coordination
-
System mapping & single-line updates
-
Engineer-led recommendations
Your Electrical Safety Ally
Why Healthcare Facilities
Choose Guidant Power
One Trusted Partner, Nationwide
Complex setups with automatic transfer switches, multiple generators, and uninterruptible power supplies must all perform flawlessly to prevent outages during patient care.
Deep Complex-System Expertise
We model and maintain intricate power schemes, from multiple generators and utility feeds to UPS and isolated power, exactly the way hospitals actually run.
Proactive, Hands-On Training
We prepare your teams for high-risk scenarios, including energized work, so people don't panic when it counts: they follow protocol.
Compliance-Focused Solutions
Purpose-built to help you stay compliant with Joint Commission, NFPA®, and OSHA requirements, complete with the documentation surveyors expect.
The Outcome
What Your Facility Will Gain
Uninterrupted Power
Protect patient care with reliable, well-managed electrical systems.
Compliance Confidence
Meet Joint Commission, NFPA®, and OSHA requirements with ease.
Enhanced Safety
Protect patient care with reliable, well-managed electrical systems.
Tailored Support
Specialized services for both contracted and in-house maintenance teams.
Real-World Solutions in Action
How We've Kept Healthcare Systems Safe
Multi-hospital network
Ensuring Compliance Across Every Campus
A large health system needed to communicate hazards clearly to contracted workers. Guidant conducted Arc Flash Hazard Analyses across all facilities, modeling complex configurations that included multiple generators and utility feeds, to meet Joint Commission standards.
Result: Real-time labeling let the client begin safety measures immediately, streamlining compliance.
Contracted Maintenance
Training Teams for Energized Work
Partnering with a facilities management provider, Guidant delivered targeted electrical safety training for maintenance staff at a regional hospital, emphasizing safe practices on energized equipment and the risks of multi-source power.
Result: Improved team confidence and measurably reduced operational risk.
Aging Facility
Troubleshooting Unclear Panel Labeling
At an older facility with ambiguous panel labeling, Guidant's expert data collectors identified true power sources and produced accurate system mapping, clarifying connections that had gone undocumented for years.
Result: Reduced downtime during maintenance and stronger safety protocols for staff and contractors.
Trusted in Healthcare
Featured Healthcare Systems We Support
Guidant Power partners with leading hospitals and health systems across North America.
FAQs
Healthcare Electrical Safety FAQ
Answers to the questions we hear most from portfolio managers and EHS teams.
